The spacing from center to center on the top and bottom of the Valterra Replacement Window Frame for RV Entry Doors # A77009 is 4-5/16" apart and the center to center spacing on the sides is 6-15/16" apart. view full answer...
I went to our warehouse to measure the thickness of the Valterra Frame Assembly and Glass for RV Entrance Door # A77051. The two sides' mounting flanges are 1-3/8-inches apart so this would be the ideal thickness of the RV door into which this will be installed. view full answer...
The diameter of the receiving hole of the Pivoting Door Holder Receiver # 37210635 is 9/16" of an inch. It is not meant to work on older featherlite horse trailers for the down window as a keeper, is it a replacement part for the Pivoting Plunger and Socket Door Holder for RV or Enclosed Trailer - 3" Plunger # 37210645.
I have added links below to video reviews of both parts for you to check out as well. view full answer...
You did not overlook anything, as the 11-7/8" wide x 21-1/2" tall dimension is just the shade of the Lippert Thin Shade Complete Window Kit # LC806621. The window frame of this kit measures 15" wide x 24" tall, according to the manufacturer. view full answer...
I was able to measure the Adco RV Windshield Cover # 290-2411 and get some approximate measurements for you. It is a little difficult to get exact measurements though since everything is rounded and contoured to a windshield/side windows shape.
The overall length along the top is 117-1/2", the overall length along the bottom is 161-1/2".
The overall height for the side window portionas are 23" while the overall height for the windshield is 29".
Yes, this has been confirmed to fit a 2000... view full answer...
I reached out to my contact at Lippert and she said that the Think Shade Complete Window Kit # LC806621 is designed to work with Lippert RV doors, but if you are retro-fitting it onto something different it can be installed on doors that are around 1-1/2" to 2" thick. This could work for your cargo trailer conversion, but you may need to add some kind of spacer to fill in a small gap for it to work perfectly. view full answer...
I went out to our warehouse to take a look at the Lippert Components Inner and Outer Entry Door Frame # LC363370 referenced in your question. I measured an inside channel dimension of right at 1 inch. I have attached an image with this dimension labeled that you can also take a look at.
This is a 12 inch x 21 inch inner and outer entry door window frame that is for use on LCI Radius RV Entry Doors. I have included a short video demonstration on this product for you to check out as well. view full answer...
The Rampage Replacement Jeep Soft Top in khaki color, part # RA68736, is a confirmed fit on your 1997 Jeep TJ and according to my contact at Rampage the top's window material is 30 mils thick. view full answer...
We do have the Solera XL 30" Projection Window Awning in solid black as part # LC49FR on our site.
The 42" width is just the fabric and when I reached out to my contact at Lippert they said that the mounting hardware should add about 1-1/2" to either side of the awning so you're looking at a total width of about 45".
Please note that the support arms are sold separately as part # LCV000334764 so you'll want to pick those up while you're at it if you don't already have them. view full answer...
Sounds like you are looking for the Redline Weatherstrop Tape part # WS1412.
The strip size of this is 1/4 inch thick and 1/2 inch wide. view full answer...
I verified with Lippert that the glass that comes with the Lippert Thin Shade Complete Window Kit # LC806621 measures 12 inches wide x 21 inches tall.
This is a snap-in window frame, so you may not be able to retrofit it, and it is also smaller, so probably won't be the best fit in your 15-3/4 inch wide x 24-3/4 inch tall frame, but we do have an option for you.
What you can do instead is add the Valterra Entry Door Window Frame Assembly # A77051 which has a 15-3/4 inch wide x 24-3/4... view full answer...
I attached a picture of the dimensions or the Lippert Door Window Frame part # LC363370 that you referenced. The size you have is the standard that this is designed to fit. view full answer...
The Valterra Replacement Window Frame # A77012 is just the interior frame. The exterior piece is # A77008. They are both 15-3/4" wide x 24-3/4" tall overall and accept a 12" wide by 21" tall piece of glass. If you also need screws you can use # A7704812 which is a quantity of 12. view full answer...
The Classic Accessories UTV rear window you're looking at, part # CA78637, is about 49 inches across not including the straps. It's also about 34-1/2 inches tall.
It's custom designed to fit a Yamaha Rhino from 2007 to 2013. If you can tell me the model of year of your Cub Cadet or the width you're looking for I may be able to find one that fits if this one doesn't. view full answer...
Without a hitch you're going to be extremely limited in options and ability. The best choice for a bike rack will be the Yakima FullBack 3 Bike Rack item # Y02633. This bike rack mounts to your rear window and has a maximum capacity of 35 lbs per bike when transporting two bikes. It is capable of transporting three bikes but if you do this you'll be limited to 90 lbs total.
If you are needing to transport heavier bikes or don't like the window mounted style, you'll need to add a hitch... view full answer...
I reached out to Redline for you to get an answer. They informed me that there is no stated weight rating on the Bolt-On Stainless Steel Spring Latch part # SL716SS. It has been designed for use typically in holding doors ramps or windows closed on trailers. view full answer...
You would be looking at about 9 inches from the ground to the bottom the receiver on your 2015 Hyundai Accent hatchback using a trailer hitch such as # 24884. To that 9 inches you would add 1-1/2 inches for the wall thickness of the receiver and the opening. Then you would add about another 6 inches for the height of the basket part of 17x46 Curt Cargo Carrier for 1-1/4" and 2" Hitches - Steel - 500 lbs Item # C18145.
That is a total of 16-1/2 inches from the ground to the top of the carrier... view full answer...
In regards to the SportRack Pop-Up Camper Roof Rack part # SR1020, the distance from the bottom of the crossbar to the roof is 1-3/4". view full answer...
We have hitch extenders like the # HE06 which will extend the hitch out an additional 6 inches and can be used with bike racks like the Swagman E-Spec part # S94FR that you referenced but you should note that when you use an extender like this you cut the capacity of the hitch by 50 percent. view full answer...
The Classic Accessories Deluxe 4 - Sided Golf Cart Enclosure, part # 052963720723, fits most two person golf carts and measures 64 inches long by 43-1/2 inches wide in the front and 51 inches wide in the back.
The thickness of the vinyl windshiled on the Classic Accessories Deluxe 4 - Sided Golf Cart Enclosure, part # 052963720723 , is .3 millimeters. and the material is heavy duty but a thickness is not provided by the manufacturer.
I have personally handled one of these covers and... view full answer...